Sand Casting Ductile Iron Casting Parts Mounting Base

ductile iron casting

Types Of Materials Used By Sand Casting Suppliers

Gray Iron is characterized by randomly oriented graphite flakes, which develop brittleness and poor ductility in the material. It is used widely in the automotive industry for engine blocks, brake disks, brake drums and housings. Gray iron has excellent machinability with superior wear resistance characteristics and damping capability.

Ductile Iron is popular for wheel parts, crankshafts and camshafts. In ductile iron, the graphite particles, due to the injection of a small amount of Mg in the melt, exist in spherical shapes that provide superior ductility and high strength and toughness. In general, ductile iron (such as grade GGG40) is easy to machine but produces built-up edges on the cutting tool due to its higher ferrite content. Machining certain grades of ductile iron (such as GGG60) will result in rapid insert wear due to pearlite content.

Compacted Graphite Iron has graphite particles which are randomly oriented and elongated similar to gray iron, but they are thicker, shorter and have shorter edges. The interconnected compacted graphite provides slightly higher thermal conductivity and more damping capacity. With the evolved process control technologies, CGI use is growing in the automotive and heavy truck industries with components that are prone to have simultaneous mechanical and thermal loading.

Sand Casting Parts casting products
Sand Casting Parts

High Alloy/White Iron is produced via rapid casting solidification and provides high compressive strength and excellent wear resistance. White iron contains large quantities of hard carbides that are difficult to machine and are responsible for high tool-wear rates. In addition, high-alloy irons (including high alloy white, gray and ductile iron) have extreme abrasive wear, heat and corrosion resistance, low thermal expansion and non-magnetic properties.

Since every type and grade of cast iron is unique, machining cast iron components depends upon the material’s graphite structure, microstructure of the metal matrix and temperature-to-time history of the castings.

sand casting parts white iron casting supplier ductile iron vs cast iron



 1. More than 20 years expereince in casting.

 2. High-quality ductile or gray iron.

 3. Short development period (for the first sample).

 4. On-time delivery.

 5. Competitive price.

 5. Strict quality control system.

 Quality Control Policy 

“Fulfilling customer satisfaction with high quality”

To conduct this policy right, Berdom establishes the quality management system based upon ISO/TS 16949:2002 and implements the following:

1. Fulfilling customer satisfaction by active response on requirements and application in quality management system.

2. Specifying job by sections for continuous quality renovation & converting way of thinking to willingness of “Will Do” and belief of “Can Do”.

3. Trying workers’ best to guarantee high quality level in the casting industry by unity and harmony of all employees.

4. Releasing quality control policy to stakeholders, setting and understanding quality goal for achieving this policy, and reviewing effectiveness of quality management system, improving this system continuously.

All employees at Berdom understand our quality goal, complete education and training, do their best with a sense of duty about realizing our quality control policy.

Contact us if you have any queries.


More Posts

Scroll to Top